Toshiba NB200-10p - DISSECTED :D As I could not find any info on how to open up the NB200, I had to make my own way in, and it took quite some time to get there. I thought it would be nice to film the assembly, and describe the disassembly step by step, so some of you netbook modders could have it more easy ;) Didn't have the camera for the disassembling, so here's the assembly video. If you're taking it apart, just do the opposite procedure ;) I'll describe the whole process step by step, as it's not all that simple. It's the most complicated netbook I've seen ;) First of course unplug it from the mains, and remove the battery. Put it bottom side up, and then unscrew and remove the memory bay hatch. Then do the HDD hatch, for which you will need a Torx T7 bit. You wont get any further then this if you don't have a T7 bit. Then unscrew the two Torx screws, and remove the hatch. It will give you access to the HDD and both miniPCI modules. On mine there is only the WiFi in place, and the second one doesn't have the miniPCI connector soldered ;-( So no easy mods for me ;) If You are lucky to have the second miniPCI connector, you could just buy the 3Gmodem (or whatever you would like to install) and just plug it in and rig up the antenna. or just ditch the WiFi and replace it with 3G. Well, that's the EASY way. Here's the hard way continued ;) After you remove the HDD (just slide it out of the SATA connector, and pull out holding it to the sides) unscrew 7 screws marked as ...
Keywords: toshiba, nb200, dissected, hack, mod, modding, netbook, 3G
No comments:
Post a Comment